Customer Services
My Account
Shopping Cart

Wallmount

The new AVEQ Wall Mount range is designed around a modular system called Sistema 45 (System 45). This range is the result of a joint venture between AVE S.p.a. of Italy and R.Hamilton & Co. England. Each AVEQ module is supplied fitted with a U.K. standard (86 mm x 86 mm) single gang white facia and mounting frame.

In addition to the standard white finishes shown, a complete range of other stylish finishes are available to co-ordinate with your decor. Please contact your nearest dealer for further information. We recommend that 44 mm back boxes are used for all AVEQ products although it is possible to use shallower back boxes for some products.

QED WM-05 Pair gold Phono Sockets

Features: Pair of gold plated sockets, Solder connection

QED WM-07 Quad Gold Phono Socket

Features: Quad bank of gold plated sockets, Solder connection

QED WM-09 Pair Gold 4mm Sockets

Features: Pair of 4mm solid brass 4mm sockets, Solder/screw connection

QED WM-11 Quad Gold 4mm Stocket

Features: Quad bank of gold plated sockets, Solder connection

QED WM-14 Speaker Volume Control

Features: Seven-step control with electronic protection,From "fully-off" to "fully-on",Screw terminal connection,Wall box depth must be 44mm minimum,Power: 20 watts per channel music power

QED WM-15 Parallel 2 Way Speaker

Features: Parallel switching,Power rating 150 Watts RMS,NOT suitable for use with WM14 volume control,Silver plated switch contacts,Screw terminal connections

QED WM-16 In-Line Speaker Switch

Features: Power rating 150 Watts RMS,Silver plated switch contacts,Screw terminal connections

QED WM-17 2 Way Speaker Switch

Features: Series switching ensures maximum safety for the amplifier, Power rating 150 Watts RMS, NOT suitable for use with WM14 volume control, Silver plated switch contacts, Screw terminal connections

QED WM-19 A-B Switching Unit

Features: Safe switching, Silver plated switch contacts, Screw terminal connections

QED WM-21 Line Level Volume Control

Features: Close tolerance conductive plastic film potentiometer, Connects to the input of a stereo power amp, Can be used with an input expander, Solder connection, DO NOT attempt to use at speaker level

QED WM-22 Roomlink Eye

Features: IR flash receive indication, For use with Roomlink driver only (version 3 only), Up to 4 WM22 may be connected to a Roomlink driver

SAP-Single Gang Fascia & Frame

Single Gang Fascia and mounting frame to accept either a KMS, CMS and DMS module or Modular PIM-E, SIM-E and IRM-E Modules.

SAP-WM05/WM09 (For AVEQ WM05/WM09/Modular KPM-1)